Spigen and Apple will both cover the capture button on their cases
Accessory maker Spigen gave AppleInsider an early look at its new case for iPhone 16, highlighting the new Capture button with a special cover to support its touch functionality.
On September 4, it was rumored that Apple’s first party cases would have a covered Capture button. AppleInsider was able to independently confirm that claim, and now case manufacturer Spigen has proven to us that they are doing the same thing.
At least on Apple’s silicone case, the button will still be metal with three vertical rows of tiny holes drilled throughout it. Then there appears to be some sort of conductive material underneath to help enable the touch functionality.
A mockup of Apple’s new covered Capture Button on its silicone case based on what we’ve seen
We’ve heard that the button itself will be capacitive, which will help prevent it form being inadvertently triggered in your pocket. The feature enables trackpad-like functionality for zooming, cycling filters, and other tasks based on the photo app you’re using.
Some, like this case we covered, opted for a cutout around the capture button
That has seemingly left many case designers in a lurch. We’ve seen other vendors opting to leave the capture button open, rather than covering it and potentially impeding its functionality.
It’s similar to the launch of the Action Button where many cases had cutouts. It wasn’t until they sold through initial stock did second-gen versions launch with an appropriate cover.
Spigen found a way to cover the capture button and make it still work
One case manufacturer thinks they have it solved, though. Spigen sent us its Ultra Hybrid MagFit case that has a unique covering.
The case is otherwise clear with a harder plastic back and a softer grey bumper around the edge. MagSafe is supported with a ring of magnets in the center.
Of course, the case supports MagSafe too
For the presumed Capture button, there is a small piece of what appears to be black-tinted metal that blends into the darkened sides.
There appears to be some conductive material on the inside of the capture button to make it work
It’s free floating, suspended by some sort of rubber gasket. The inside of the button has a white material, likely a conductor similar to what Apple is doing.
To work, it must make contact with the whole button — and it looks like it will. Based on what we’ve learned, the button is slightly recessed, so when a phone is inserted, it will push out against the button ensuring good contact.
Other case makers will likely follow Spigen and Apple’s lead
Of course, there’s no way to test the efficacy of the Capture button and cases until Apple makes things official during the It’s Glowtime event on September 9th.
Be sure you’re tuned into AppleInsider to stay up to date with all of the latest news.
