We resume our coverage of Stutz today and pick up in the mid-Seventies. With the reborn brand’s personal luxury Blackhawk attracting the rich and famous from across the nation, Stutz attempted to keep the car fresh through visual edits every couple of years. In addition to the marketing appeal of a new “generation” Blackhawk, management was also able to cut costs: Split windshields became one-piece, and bespoke doors were replaced with those of a Pontiac Grand Prix.
All the while, the Blackhawk’s price continued to escalate and doubled by the end of its first decade. It was by far the most expensive American car on sale. We find ourselves in 1977, as Stutz continued with Blackhawk edits after the one-off convertible version named d’Italia was scrapped.
The Blackhawk entered its fifth-generation guise in 1977. With minor visual revisions, the Blackhawk would see three more model years before it was majorly revamped. Worth a note, due to the interesting way the Stutz cars were labeled, Stutz began to add “VI” badges on the Blackhawk as early as 1975. The badges stayed put through 1979.
Said badges were on the door panel next to the golden Blackhawk script and were one of the only ways to tell the latter Blackhawk apart from its predecessors. Other interior materials were changed only vaguely, with things like an updated shift lever and Cadillac dual-zone climate control modernized over earlier examples.
Outside, a small VI badge appeared in the grille, though from any distance it just looked like a square. The factory wire wheel design changed slightly and adopted more deep dish styling instead of the flush wires earlier in the run. Changes were minor and mixed within model years after about 1973, so it’s difficult to tell the years apart without a close inspection.
As mentioned last time, it seems the Blackhawk was assembled with whatever trim was available in the Turin, Italy coachworks that week. There was little regard if it matched the current “new generation” Blackhawk.
One notable change for 1977 was a completely revised lineup of engines, as emissions regulations of the late Seventies strangled horsepower and slowly killed off the big-block V8. The entry-level Blackhawk engine in ’77 was Ford’s 302 cubic-inch (4.9-liter) Windsor V8, which was used from 1966 through 2001 in products like the Ford Torino and Explorer. Next in displacement was the Pontiac 350 V8 (5.7L), as pulled from the contemporary Grand Prix. Ford provided a 351 Windsor (5.8L) to Stutz as well, not to be confused with Ford’s 351 Cleveland V8.
Stepping up to 400 cubic inches, the Blackhawk could be had with the Pontiac T/A 6.6 from the Trans Am. Two more 400-plus engines joined the lineup in 1977, the 425 Cadillac V8 (7.0L) from its larger sedans, and Ford’s enormous 460 V8 (7.5L) used in the E-Series vans between 1975 and 1996.
By this time the Blackhawk was quite a mélange: Late Sixties platform, Sixties and Seventies interior materials from GM, and engines from the Malaise era. But it was coming to an end soon. The personal luxury coupe (and North American cars generally) experienced big-time downsizing between 1977 and 1980, and Stutz could no longer produce the Blackhawk on the 1969 G-body.
As mentioned last time, Stutz employed famed designer Paolo Martin to draw up a new, slightly more modern Blackhawk in 1976. It had lesser overhangs and tidier, more upright proportions generally. The company held on to those sketches, knowing full well the end was near for the original Blackhawk. Its last G-body outing was in 1979, but not before Stutz made the bewildering decision to introduce a new model on a dead platform.
That’s right, the convertible idea at Stutz continued percolating after the failed d’Italia was canceled. Once the roofless roadster was sold off to Evel Knievel, work continued in the background. New safety regulation said convertibles had to have a roll bar, and company founder James O’Donnell was insistent that Stutz designers make it happen.
So in 1979, there was a second car added to the Stutz lineup, the Bearcat. It was a resurrection of the sports car nameplate from the company’s first life. Nobody purchased a new Bearcat after 1933, during the DV-32 engine years just before the company’s first bankruptcy.
In essence, the Bearcat was the d’Italia but edited to comply with roll-over regulations. And though it was considered a separate model to the Blackhawk, it wore the exact same body save for the roof. As shown in the only PR photo of the 1979 Bearcat available on the internet, the roof of the Blackhawk was replaced by a thin Targa strip, wrapped in canvas and emblazoned with the Bearcat script. The rest of the roof folded behind the rear seats and was covered via a snap-on tonneau.
There is no further information on how many 1979 Bearcats were made, but it’s suggested the ask for one that year was, like the d’Italia, $100,000 ($423,292 adj.). Undoubtedly only a small handful were produced, as Stutz prepared to transition its bread and butter two-door offering to a new platform. Time for a sidebar into Pontiac.
Downsizing in the late Seventies hit the Grand Prix hard, as the personal luxury coupe moved on to the smaller A-body platform for 1978. This platform would later be renamed G (again) for 1982 onward, as GM enjoyed confusing people with its platforms. The new 108-inch wheelbase on the 1978 Grand Prix was a far cry from the 118 inches Stutz was used to.
Thus Stutz had to step up a size and go with the B-body. From 1980 the Blackhawk was based on the Pontiac Bonneville. Bonneville entered its sixth generation in 1977, as GM unleashed its massively successful full-size downsizing effort. The B-body Bonneville had a 116-inch wheelbase, not far off from the Grand Prix chassis the artisans in Italy used since 1971.
The Blackhawk had to get a bit shorter in its new guise, as the nearly 228-inch body gave way to something closer to the Bonneville’s 214 inches. In 1977, Bonneville had an overall width of 76.4 inches. There aren’t any posted measurements for the 1980 Blackhawk, so we’ll have to rely on Bonneville dimensions here for a general idea. The B-body platform served as a decent stand-in for the long-deceased G from the Grand Prix.
With its new platform, the Blackhawk was forced to get a bit more formal. One only needs to consider the late Sixties Grand Prix alongside a 1977 Bonneville two-door to see why. The Bonneville was upright, square, and much more a two-door sedan than a sportier and relaxed fastback or hardtop. Glass was more upright in all directions, and the roof cut sharply toward the trunk.
The folks at Stutz could only do so much with that starting point. The Blackhawk retained as much of its former glory as it could, but the changes forced upon it by a modern platform were obvious. Virgil Exner passed away long before (in 1973), so there was no guiding hand from the coupe’s ideator, either. We’ll pick up there next time, and review the new Blackhawk’s styling, interior, and mechanicals.
[Images: Stutz, YouTube, GM]
Become a TTAC insider. Get the latest news, features, TTAC takes, and everything else that gets to the truth about cars first by subscribing to our newsletter.
