The most common AirPods problems and how to fix them

If you’re running into an issue where your AirPods aren’t connecting to your phone or tablet …

Step 1: Put the AirPods back in the charging case, wait for around 30 seconds, then take them back out and pop them in your ears again.

Step 2: Or, try turning Bluetooth on and off on your phone or tablet. Then repeat the first step. In all but the most unusual cases, this should solve the issue.

Step 3: It’s not likely, but you may encounter situations where neither solution works. If this is the case, try fully resetting the AirPods. This is a catch-all fix for a lot of problems and one we’ll detail at the bottom of this article.

Another common issue AirPods owners run into is that one AirPod won’t connect.

Step 1: Just like when dealing with both AirPods, pop both of them back in the charging case, wait for about 10 seconds, then remove them and put them into your ears.

Step 2: Step 1 didn’t work? Repeat step 1, but this time turn Bluetooth on and off on your phone or tablet before removing the Pods from their charging case.

Step 3: Still nothing? Try resetting the AirPods (instructions at the end of this article).

This isn’t much of an issue with newer Macs, but sometimes maintaining a Bluetooth connection can be problematic with older machines.

Step 1: Put the AirPods back into their case for 10 seconds before removing again and inserting into your ears.

Step 2: If that doesn’t work, you will want to disconnect and connect them again, which can be done by turning Bluetooth off and on, but this could be a problem if you use a Bluetooth mouse on your computer.

Step 3: If this is the case, head to your Bluetooth settings (locate the Bluetooth icon in your status bar, or find the setting under System Preferences > Bluetooth), find the AirPods, and disconnect them.

Step 4: Your AirPods will now appear at the bottom of the Bluetooth devices list. Right-click on them and choose “Connect.”

Intermittent call drops have plagued the AirPods since they debuted back in 2017. Fortunately, there is a simple fix that often works.

Step 1: Try taking calls with only one AirPod in your ear, not both.

Step 2: If Step 1 doesn’t work, make sure your AirPods aren’t in need of a charge. You can also try turning Bluetooth off and back on again.

Step 3: If Step 2 doesn’t work, open the Settings app and go to the Bluetooth section.

Step 4: Next to the AirPods entry on the list of devices, you should see an “i” icon inside of a circle. Tap this, then select microphone, and set it to either left or right.

Step 5: In extreme cases, you can also turn off Automatic Ear Detection in the same section, though this disables one of the earbuds’ most convenient features, and will also run down the battery faster.

Step 6: As with our other fixes, if you still have issues, you can try the full reset detailed at the end of this article.

Static and/or subpar audio quality can be caused by a lot of things, so it’s much tougher to diagnose. Bluetooth connections can be affected by interference, which can cause everything from static to reduced audio quality and even disconnects. If this always happens in one place, interference could be the problem.

Step 1: If this is happening in your home, you might be able to track down the device causing interference and move it or use your AirPods in a different area. If you’re in the office, you may be out of luck.

Step 2: Wi-Fi can cause interference with the AirPods, especially during calls, so you might want to try turning off Wi-Fi while making calls. Turn it back on when you’re done.

Step 3: If you’re getting stuttering instead of static or noise, you can also try turning off Automatic Ear Detection as detailed above.

When you use Apple’s earbuds with Apple’s phones, tablets, or computers, the software automatically recognizes that you’re using headphones and all volume adjustments work as you’d expect. But on some Android devices, Bluetooth volume is regulated separately from other volume settings, and this can lead to problems for AirPods users. Fortunately, it’s easy to troubleshoot.

Step 1: For a stock Android device, tap the volume either up or down, and you should see the volume control appear on the screen.

Step 2: Tap the down arrow next to the volume control, and you’ll see all the available volume sliders appear.

Step 3: One of these should be Bluetooth. Now, just turn this one up or down as needed.

Step 4: On Samsung Galaxy phones, it’s a little different (and better). Go to Settings > Connections > Bluetooth. Here, tap the three dots in the top right corner for more options, then turn on Media Volume Sync. Now you can use the volume control on the device in the same way you would on an iOS device.

If your AirPods are clearly charged and connected, the problem often lies with your iPhone or iPad.

Step 1: Head to Settings in iOS and make sure that all software updates have been applied.

Step 2: If you have any updates waiting, plug your device in, update, and reboot your device. This often fixes problems with AirPods refusing to work entirely.

AirPods ship with two kinds of charging cases: Wired-only charging and dual wired/wireless charging. And while our first troubleshooting step applies to all models, the following step is just for when you’re having trouble charging with a USB cable. If you’re unsure whether you have a wireless charging case, the LED light gives you your answer. If you see a light on the outside, it has wireless charging. If it’s on the inside, it doesn’t.

Step 1: If you’ve had your AirPods for a while, there may be some dust and grime buildup that’s preventing the Pods from making contact with the charging pins in the case. Take a soft cloth or a swab and carefully clean the inside and bottom of the case, and thoroughly clean the stems of your AirPods to see if that helps the charging process.

Step 2: On the charging case, work out any dirt and debris that may have snuck into the charging port. The crevice is small, so you’ll need something thin and pointy, and preferably not made of metal. A toothpick is ideal.

Step 3: If that doesn’t work, try a different Lightning cable. If all else fails, you may need a replacement charging case.

The AirPods second-generation wireless case (and cases for the 3rd-gen and AirPods Pro) can charge on a wireless charging pad, but it has to be compatible.

Step 1: Make sure you are using a Qi standard charger, and place your AirPods charging case on the pad with the charging light indicator facing up.

Step 2: Try repositioning the charging case on the charger a few times, and watch for the indicator to turn on. If this doesn’t work, your charging case or wireless charging pad may be faulty.

Try one of the other sizes of silicone ear tips. The AirPods Pro come with three sizes and it might be that the ones you’re using simply don’t fit as well as the others. In addition to a better fit, you’ll also get better sound and better noise cancellation.

First- and 2nd-gen AirPods use touch sensors that you tap to control things like music playback, while the 3rd-gen and AirPods Pro use force sensors, which you squeeze between your thumb and index finger. Force sensor gestures can’t be changed, but touch sensors can be modified. Here’s how.

Step 1: Go to Settings > Bluetooth after your AirPods are connected and click the (i) button next to the name of your AirPods.

Step 2: Here, you can choose what the double-tap gesture does. Make sure it’s set to the action you’re expecting. If you don’t want to use the double-tap gesture on one or both earbuds, set the option to “Off.”

Want to check to see the specific firmware version your AirPods are running? Follow these steps:

Step 1: Make sure your AirPods are connected to your iOS device.

Step 2: Open Settings.

Step 3: Tap General.

Step 4: Select About.

Step 5: Scroll down until you see your AirPods listed, and tap them.

Step 6: Locate the number next to Firmware Version.

As noted above, completely resetting your AirPods can fix several issues. The good news is it won’t even take you a minute to do. Here’s how:

Step 1: Put your AirPods back in the charging case.

Step 2: Hold the button on the back of the case for roughly 15 seconds until the orange LED flashes.

Step 3: Open the case next to your phone and wait for the AirPods animation to show up on your device and tap “Connect.”

Whether this occurs while taking a drink or washing the dishes, AirPods can also come into contact with liquid (in the form of sweat) while you run. This is a common problem, so don’t freak out and take immediate actions that might further damage your AirPods. For example, putting your cellphone in a bag of rice might save it after it was dropped in water, but putting AirPods in rice could cause rice dust to get stuck in them.

Step 1: Dry your AirPods with a soft cloth and let them stay out in the open for several hours. AirPods are durable little earbuds, and they should work again after they’re thoroughly dried.

Step 2: If the AirPod still doesn’t work, it may be time to service or replace it.